T-304 Stainless steel construction for durability, 1.5 inch primary tubing.
Equal length runners for maximum performance.
Thick flanges for extra durability and strength.
CNC Machined Flanges with High-Quality TIG and MIG Welded for strength, durability, and show quality appearance
Mandrel bent tubing with free-flowing design allows for power gains throughout the power band!
Allows exhaust gases to exit with less restriction and allows your car to breath easier in the top end! Warranty is voided if header is wrap.
Gaskets are not included , please get new ones from the dealer.
Installation note. Skid plate spacers and new longer bolts are included. OEM skid plate will not fit back on without using our spacers.
Not for sale in the state of California, New York, and Maine.
I’ve purchase this header, after installing it I had a massive exhaust leak and I realise that the flange was not flat at all.
I had to send it to the machine shop to flat it out.
With extra cost
Makes the FA20 really open up at top end. By far my favorite mod and install. Incredible hp gain. Very aggressive deep tone! Couldn’t be happier!
-CNT equal length headers
-COBB resonated catted J-Pipe
-SubieSpeed quadtip catback exhaust
Installed the headers by myself. First attempt I drained all coolant since I was going to install a Mishimoto Radiator. I drained oil since I was going to do an oil change. No mess other than pulling the OEM headers out with turbo. Excess due to oil and coolant that are supplied to turbo. Install was more than an hour for me on first attempt.
Second attempt I did not drain coolant or oil before removal. I had minimal mess. Just make sure to clamp off necessary lines.
There is a considerable difference in sound if you're running a setup similar to mine. I'm sure if you're Catless from what I've heard, not to big of a difference. I'll do my best to get sound clips. Check out my instagram @zoom_buh.
Tune: Running the car lightly, it is not tuned for headers. No check engine light has appeared or codes on COBB AP. Tune is recommended. I am debating on flex fuel hence me waiting to tune it.
Issue: I had a small issue w/ Turbo heat sheild bracket fitting on headers, however I was able to nudge the bracket in correctly.
Do not use supplied gaskets from CNT due to possible flange warping.
Buy OEM gaskets.
Buy new studs and nuts.
Buy anti seize for threads.
Make sure you torque nuts correctly and have proper tools.
Take your time and be careful with oil feed line,studs, and nuts.
There are exposed holes that bolts and nuts may fall into such as turbo so be cautious.
If you hear noises or have vibrations then it's most likely the skid plate hitting the header. You may need to get some spacers from hardware store or use extra washers to create the space. DONT BE ALARMED.
Love the tone they give the car. Very easy to install great quality
could you send me a link with the dyno chart for this product please.